0.1-2000MHz LNA RF Signal Power Amplifier Receiver 50-4000MHz Broadband Module

Description

Home
Arduino
Module
Sensor
Chips
About Us
Applications:
The amplifier is based on the original 0.1--2000 + MHz (30dB) amplifier, using two-stage cascade is made with low noise, high gain (60dB), and is suitable to detect weak signals.
Amplifier parameters indicators:
Operating frequency: 0.2-1500MHz
Amplifier Gain: 60dB
Maximum output power: + 10dBm (10mW) @ 1dB compression point
Working Current: 35mA (9V)
Supply voltage: 6--12VDC
System Impedance: 50 ohms
The amplifier uses some tips:
1) The amplifier at the operating frequency of less than 500MHz, has a very good gain flatness. The lower the frequency, the higher the gain consistency.
2) The lower limit of the operating frequency of the amplifier input and output capacitors are subject to default is 0.1uF, it can work to 0.2MHz; you can increase the input and output capacitors to extend the lower frequency limit. Applications should pay attention to enhance the power supply decoupling and regulator.
3) When the supply voltage 5-8V changes, can be used as a variable gain amplifier, the gain with the power supply voltage increases. DA control with the power supply voltage, you can control the amplifier gain, the gain adjustment.
4) When the supply voltage is 8-10V, low-end gain of 30dB, at which point the amplifier has a low noise figure and good stability.
5) When the voltage is 12V, maximum gain, low frequency gain up to 32.5dB,
6) Since the amplifier gain very high (60dB), the input attention overload (Fmax = -50dBm), in use should follow the relevant principles of RF and microwave circuit layout.
Package Included:
1PCS*60dB RF broadband amplifier
Payment
Shipping
Refund
Payment
We accept PayPal only.
But we only
Accept
your
Ebay Address
,Please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping
Fill your shipping info
Refund
All package need to
wait 30 days
(US only n
eed 7-10 days)
,
Please take care it.Less than 30 days,we can't take a refund
.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.