1 LENS BOARD 64 x 64mm PLYWOOD - FOR GRAFLEX 2-1/4 x3-1/4" -undrilled,or Copal#0

Description

1 LENS BOARD 64mm x 64mm FOR GRAFLEX 2-1/4" x 3-1/4"
1  Lens board 64mm x 64mm  with 4.5mm rabbet on the back.
Made of
plywood
furniture
, rebated front lip is 1/8" thick.
27mm, or 32mm, or 35mm, or 42mm hole.
It is recessed to accept the Copal #0 retaining ring on the rear site.
The bottom edge of the lens board is beveled like the original for ease of installation.
.
Not fit Pacemaker,
"Baby" Pacemaker Crown Graphic, using only thin metal (round corner) lens boards.
The buyer
selects a one
of the following lens board:
5 available - medium cherry stained, undrilled
5 available - black, undrilled
2
available
- medium cherry stained - 27mm hole for #00
1
available
- black - 27mm hole for #00
3
available
- black - 32mm hole
5
available
-
medium cherry stained
- 35mm hole for #0
3
available
- black - 35mm hole (recessed) for #0
1
available
-
medium cherry stained
- 42mm hole for #1
1
available
-
black
- 42mm hole for #1
0 pc -  dark brown stained - 35mm hole (recessed)
for #0
- sold
10 available Raw/undrilled - free finish & free hole
.
Happy bidding and good luck.
Any questions - please ask.
Buyers with 0 to 5 feedback please contact prior to bid
.
PayPal only, higher bidder has to pay ASAP after auction end.
Please make your payment in 48 hours after auction end. By law selling/buying is a contract.
Good luck, and thank you for stopping by.
Check my other items