-40%

Assembled Automatic Antenna Tuner 10A Relay, MAX, 200W Automatic Antenna Tuner

$ 87

Availability: 75 in stock
  • Brand: Unbranded
  • Condition: New
  • Package Contents: ATU-200 turner board

    Description

    Assembled Automatic Antenna Tuner 10A Relay, MAX, 200W Automatic Antenna Tuner
    DESCRIPTION
    Assembled Automatic Antenna Tuner 10A Relay, MAX, 200W Automatic Antenna Tuner
    Adopt SMI-12V, 10A relay, MAX, 200W, it is recommended to use no more than 150W for a long time.
    Features:
    It can be equipped with long wire, GP, inverted V, positive V, dipole antennas, etc.
    It can be applied to any shortwave machine within 200w (as long as it can output 5-15w during tuning)
    With continuous radio frequency, you can tune. Such as am, cw, fm), without control line, short wave automatic tuning
    The relay adopts SMI, OMRON 12V, 10A, 16A high-power relay.
    Adopt PIC16F1938 MCU and 7 LC combinations were used.
    Adopt 7 hollow inductors design, and adopt 6 kV, high voltage ceramic chip capacitor.
    Adopt SMI-12V, 10A relay, MAX, 200W, it is recommended to use no more than 150W for a long time.
    This tool set not includes the shell, you can make a shell for it as you like.
    The tuning impedance ran-ge is 5Ω~1.1KΩ.
    Specifications:
    Tuning impedance range: 5ohm~1.2Kohm
    Power supply voltage range: 11-15 V DC
    Maximum current consumption: 600 mA
    Maximum working power: 200 watts
    Power required to start tuning: 10 watts
    The smallest possible measurement power: 0.1 watts
    Power measurement accuracy: 10%
    Maximum installation inductance: 10μH
    Minimum installation step of inductance: 0.05μH
    Maximum installed capacity: 869 pF
    Minimum capacitance installation steps: 5pF
    Typical consumption 200-500 mA
    Colour:blue
    Size: about 290 x 185 x 60mm
    Note:
    The case as this picture shows, it is not a special shell for the machine. It needs to be drilled and assembled by the customer. If you don't have a drilling tool, don't select the "option with case"
    Package includes:
    1 x ATU-200 turner board
    1 x Set of accessories
    1 x Case
    POLICES
    Shipping
    Payment
    WARRANTY
    We only ship to confirmed ebay Order addresses. Please comfirm that your Order address is in line with your shipping address.
    Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size.
    It takes about 7-15 working days to Canada; about 10-30 working days to other countries. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance.
    Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.
    We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, please feel free to contact us via "Ask seller a question" . We will reply your email within 24 working hours.