LIL RASCAL PLANS to Build Both a 27" & a 36" UC / FF / RC 1/2A Model Airplane

Description

I AM NOT SELLING A KIT
,
only
2
new, full-size copies of my original
PLAN
+
Air
Trails
article
to scratch-build a 27" and a 36" Goldberg
LIL RASCAL,
all-balsa, UC or FF model airplane. The model used a Baby Spitfire .045 or K & B Torp .049 because they both had attached fuel tanks. Today a Cox PEE WEE .02 is best---that's true if you make your models into an RC.
The 27" span wing, rudder, stabilizer and fuselage side patterns are clearly drawn on this restored
PLAN
. Competent scratch-builders will be able to make a firewall and fuselage bulkheads by the cut-and-try method using sheet cardboard to make your patterns.
Pop’s Pro Tip:
“I made my firewalls slightly wider than the backplate mounting width of the 1/2A engine I planned to use. From that width and height I made as many bulkheads of the same width and varying heights back to the rearmost point of the wing trailing edge. Then I made the number of bulkheads needed from that point on back to the rear tip---tapering them in width as I went.”
“I'm admonished at times for "back-to-basics" explanations but, if there is a simpler model to scratch-build & enjoy flying, I don't know of it.”
YOU ARE BUYING NICE, NEW, FULL-SIZE COPIES OF THE Goldberg LIL RASCAL
PLAN
IN TWO SIZES + ARTICLE TO BUILD BOTH A 27” & 36” MODEL PLANE. IT WILL COME FOLDED AND IN A MANILA ENVELOPE.